{ "translations": {
    "Daemon config not found" : "找不到幕後程式設定",
    "Error starting install of ExApp" : "錯誤開始安裝 ExApp",
    "ExApp failed to register, check the NC logs" : "ExApp 註冊失敗，請檢查 Nextcloud 紀錄檔",
    "ExApp not found, failed to get status" : "找不到 ExApp, 無法獲取狀態",
    "Error adding Docker registry" : "添加 Docker 註冊表時出錯",
    "Error removing Docker registry" : "刪除 Docker 註冊表時出錯",
    "This app is not installed from the AppStore. No extra information available. Only enable/disable and remove actions are allowed." : "此應用程式未從 AppStore 安裝。無法提供額外信息。僅允許啟用/禁用和移除操作。",
    "Could not perform installation of ExApp" : "無法執行 ExApp 的安裝。",
    "Failed to enable ExApp" : "無法啟用 ExApp",
    "Failed to disable ExApp" : "無法停用 ExApp",
    "Could not update ExApp" : "無法更新 ExApp",
    "Error starting update of ExApp" : "錯誤開始更新 ExApp",
    "Could not perform update of ExApp" : "無法執行 ExApp 的更新。",
    "ExApp not found, failed to get logs" : "找不到 ExApp，無法取得紀錄檔",
    "Failed to get container logs. Note: Downloading Docker container works only for containers with the json-file or journald logging driver. Error: %s" : "無法取得容器紀錄檔。注意：下載 Docker 容器僅適用於有 json-file或 journald 紀錄檔驅動程式的容器。錯誤：%s",
    "ExApp not found, failed to get deploy options" : "找不到 ExApp，無法取得部署選項",
    "AppAPI authentication failed" : "AppAPI 驗證失敗",
    "AppAPI ExApp notifier" : "AppAPI ExApp 通知器",
    "AppAPI" : "AppAPI",
    "AI Integration Team" : "AI 整合團隊",
    "ExApps Settings" : "應用程式設定",
    "AppAPI deploy daemon" : "AppAPI 部署幕後程式",
    "AppAPI default deploy daemon is not set. Please register a default deploy daemon in the settings to install External Apps (Ex-Apps)." : "未設定 AppAPI 部署幕後程式。請在設定中註冊預設部署幕後程式以安裝外部應用程式 (Ex-Apps)。",
    "AppAPI default deploy daemon \"%s\" is not accessible. Please check the daemon configuration." : "AppAPI 預設部署幕後程式「%s」無法使用。請檢查幕後程式組態。",
    "AppAPI default deploy daemon is not using HaRP. Please consider upgrading to it for better performance." : "AppAPI 預設部署幕後程式未使用 HaRP。請考慮升級為 HaRP 以獲得更好的效能。",
    "Nextcloud AppAPI" : "Nextcloud AppAPI",
    "### Boost your Nextcloud with AppAPI and its specially designed applications.\n\n\nThe AppAPI is a project within the Nextcloud ecosystem designed to streamline and enhance the process of\napplication development, deployment, and management.\n\nIt introduces a new methodology that allows developers to create\napplications using a variety of programming languages, not limited to PHP, which was traditionally used in Nextcloud development.\n\n_If you wish to develop an application, we will gladly help and assist you._\n\n### Support\n\nWe appreciate any support for this project:\n\n- ⭐ Star our work on GitHub\n- ❗ Create an Issue or feature request\n- 💁 Resolve an Issue and create a Pull Request\n- 🧑‍💻 Develop your own application using AppAPI\n\nWe are genuinely excited about the future of the AppAPI project and its potential to transform\nthe way applications are developed and experienced within Nextcloud.\n\nAs we embark on this journey, we warmly invite you - developers, thinkers, creators, and visionaries -\nto join us in shaping a more versatile, stable, and secure app landscape.\n\n*Your insights, suggestions, and contributions are invaluable to us.*" : "### 使用 AppAPI 與其專門設計的應用程式強化您的 Nextcloud\n\n\nAppAPI 是 Nextcloud 生態系中的一個專案，旨在簡化並強化\n應用程式開發、部署及管理。\n\n其引入了一種新的方法，讓開發者可以製作\n使用多種程式語言的應用程式，不僅限於 PHP，後者傳統上用於 Nextcloud 開發。\n\n若您想要開發應用程式，我們很樂意為您提供協助。\n\n### 支援\n\n我們感謝對此專案的任何支援：\n\n- ⭐ 在 GitHub 上給我們的作品星星\n- ❗ 建立問題或功能請求\n- 💁 解決問題並建立拉取請求\n- 🧑‍💻 使用 AppAPI 開發您自己的應用程式\n\n我們對 AppAPI 專案的未來及其改變 Nextcloud 中應用程式開發與\n體驗方式的潛力感到由衷的興奮。\n\n當我們踏上這趟旅程時，我們熱烈邀請您（開發者、思想家、創造者和夢想家）\n與我們一起塑造更通用、穩定和安全的應用程式格局。\n\n*您的見解、建議和貢獻對我們來說非常寶貴。*",
    "External Apps management" : "外部應用程式管理",
    "Admin options saved" : "已儲存管理選項",
    "Failed to save admin options" : "儲存管理選項失敗",
    "The AppAPI Project is an exciting initiative that aims to revolutionize the way applications are developed for Nextcloud through the use of docker containers. Allowing for greater programming language choice and allowing computationally expensive tasks to be offloaded to a different server." : "The AppAPI Project 是一個令人興奮的計劃，旨在通過使用 Docker 容器來徹底改變 Nextcloud 應用程序的開發方式。這樣可以提供更大的編程語言選擇，並允許將計算密集型任務卸載到不同的伺服器上。",
    "Deploy Daemons" : "部署幕後程式",
    "Deploy Daemon (DaemonConfig) is an ExApps orchestration daemon." : "部署幕後程式 (DaemonConfig) 是 ExApps 的協作幕後程式。",
    "Deploy Daemons. Deploy Daemon (DaemonConfig) is an ExApps orchestration daemon." : "部署幕後程式。部署幕後程式 (DaemonConfig) 是外部應用程式的協作幕後程式。",
    "Default Deploy Daemon is not accessible. Please verify its configuration" : "預設部署幕後程式無法使用。請驗證其設定",
    "ExApp init timeout (minutes)" : "外部應用程式初始化逾時（分鐘）",
    "ExApp initialization process timeout after which AppAPI will mark it as failed" : "外部應用程式初始化流程逾時，在此之後 AppAPI 將會標記其為失敗",
    "ExApp init timeout" : "外部應用程式初始化逾時",
    "ExApp container restart policy" : "外部應用程式容器重新啟動政策",
    "Specify container restart policy, e.g. 'always' to ensure ExApp running after daemon server reboot" : "指定容器重新啟動政策，例如「一律」確保外部應用程式在幕後程式伺服器重新啟動後執行",
    "This settings changes are reflected only for newly created containers" : "此設定變更僅反映在新建立的容器中",
    "Are you sure you want delete Deploy Daemon" : "您確定您想要刪除 Deploy Daemon 程式嗎",
    "All ExApps on this daemon will be removed" : "所有在此幕後程式上的外部應用程式都將會被移除",
    "All ExApps installed on this daemon will be removed" : "所有安裝在此幕後程式上的外部應用程式都將會被移除",
    "Cancel" : "取消",
    "Delete" : "刪除",
    "\"manual-install\" Deploy Daemon cannot be set as default" : "\"人手安裝\" 部署 Daemon 不能設置為默認",
    "Failed to save admin options. Check the logs" : "儲存管理選項失敗。請檢查紀錄檔",
    "Password confirmation failed" : "密碼確認失敗",
    "Default" : "默認",
    "Set as default" : "設定為默認值",
    "Test deploy" : "測試部署",
    "Docker registries" : "Docker 註冊表",
    "Edit" : "編輯",
    "Daemon connection successful" : "幕後程式連線成功",
    "Failed to connect to Daemon. Check the logs" : "連線至幕後程式失敗。請檢查紀錄檔",
    "Failed to check connection to Daemon. Check the logs" : "檢查至幕後程式的連線失敗。請檢查紀錄檔",
    "Deploy daemon config details" : "部署幕後程式設定詳細資訊",
    "Deploy Daemon" : "部署幕後程式",
    "Default daemon. ExApps will be installed on it" : "預設幕後程式。ExApps 將會安裝在其上",
    "Manual install daemon usually used for development. It cannot be set as default daemon." : "手動安裝幕後程式通常用於開發。其不能被設定為默認幕後程式。",
    "ExApps installed" : "已安裝 ExApp",
    "Name" : "名字",
    "Protocol" : "協定",
    "Host" : "主機",
    "ExApp direct communication (FRP disabled)" : "ExApp 直接通信（FRP 已禁用）",
    "Deploy config" : "部署設定",
    "Docker network" : "Docker 網絡",
    "Nextcloud URL" : "Nextcloud URL",
    "HaProxy password" : "HaProxy 密碼",
    "GPUs support" : "GPUs 支援",
    "Compute device" : "計算裝置",
    "Additional options" : "附加選項",
    "Verify connection" : "驗證連線",
    "Registered Deploy daemons list" : "已註冊的部署幕後程式清單",
    "No Deploy daemons configured" : "未設定部署幕後程式",
    "Register a custom one or setup from available templates" : "從可用範本註冊自訂範本或設定",
    "Register Daemon" : "註冊幕後程式",
    "Register ExApp in Nextcloud" : "在 Nextcloud 註冊 ExApp",
    "Check if the ExApp is registered in Nextcloud before deployment" : "部署前檢查 ExApp 是否已在 Nextcloud 中註冊",
    "Image pull" : "拉取映像檔",
    "Check if the image is successfully pulled" : "撿茶室否成功拉取映像檔",
    "Container started" : "容器已啟動",
    "Check if the image successfully pulled and container is created and started" : "檢查是否成功拉取映像檔，以及容器是否已建立並啟動",
    "Heartbeat" : "心跳",
    "Check for the heartbeat is finished and healthy" : "檢查心跳是否完成且健康",
    "Init step" : "初始化步驟",
    "Wait for initialization step to finish" : "等待初始化步驟完成",
    "Enabled" : "啟用",
    "Check if ExApp successfully handled the enabled event and registered all stuff properly" : "檢查 ExApp 是否成功處理啟用的事件並正確註冊所有內容",
    "Only if ExApp container is preset" : "僅當 ExApp 容器已預設時",
    "Deploy test passed successfully!" : "部署測試成功通過！",
    "Deploy test failed at step \"{step}\"" : "部署測試失敗於步驟「{step}」",
    "AppAPI will try to install small skeleton ExApp to verify Daemon configured correctly and deployment steps are passing." : "AppAPI 將嘗試安裝小型 ExApp 骨架來驗證幕後程式是否正確設定以及部署步驟是否通過。",
    "The following Deploy test checks must be passed to succeed:" : "必須通過以下部署測試檢查才能成功：",
    "More info" : "更多資料",
    "Download ExApp logs" : "下載 ExApp 記錄",
    "Remove test ExApp" : "移除測試 ExApp",
    "Start Deploy test" : "開始部署測試",
    "Stop Deploy test" : "停止部署測試",
    "ExApp is unregistered and container is removed on \"Stop deploy test\"" : "ExApp 已被註銷，其容器已在「停止部署測試」中刪除",
    "Please enter a registry domain" : "請輸入註冊表域名",
    "From cannot be \"local\"" : "來源不能是「本地」",
    "This registry mapping already exists" : "此註冊表映射已存在",
    "From and To cannot be the same" : "來源和目標不能相同",
    "Docker registry mapping added" : "已添加 Docker 註冊表映射",
    "Error adding Docker registry mapping" : "添加 Docker 註冊表映射時出錯",
    "Docker registry mapping removed" : "已移除了 Docker 註冊表映射",
    "Error removing Docker registry mapping" : "移除 Docker 註冊表映射時出錯",
    "Override Docker registries" : "覆蓋 Docker 註冊表",
    "Configure Docker registry override mappings for selected daemon." : "為選定的守護進程配置 Docker 註冊表覆蓋映射。",
    "The matching source registry in ExApp info.xml will be overwritten during deploy (image pull step)." : "在部署過程中（映像拉取步驟），ExApp info.xml 中的匹配源註冊表將被覆蓋。",
    "This is useful if you want to use a custom Docker registry, for example, to use a private Docker registry, or to use a different Docker registry for testing." : "如果您想使用自定義 Docker 註冊表，例如使用私有 Docker 註冊表或使用不同的 Docker 註冊表進行測試，這將非常有用。",
    "Image pull will be skipped" : "將跳過映像拉取",
    "Remove" : "移除",
    "No custom Docker registries configured" : "未配置自定義 Docker 註冊表",
    "Add registry override mapping" : "添加註冊表覆蓋映射",
    "From" : "從",
    "registry URL (e.g. ghcr.io)" : "註冊表 URL（例如 ghcr.io）",
    "To" : "至",
    "registry URL (e.g. docker.io)" : "註冊表 URL（例如 docker.io）",
    "Add" : "添加",
    "Hostname to access ExApps" : "用來存取外部應用程式的主機名稱",
    "The hostname (and port) at which the {name} is available. This need not be a public host, just a host accessible by the Nextcloud server, e.g. {host}." : "{name} 可用的主機名稱（與連接埠）。這不一定是公開主機，只要是 Nextcloud 伺服器可以存取的主機即可，例如：{host}。",
    "The hostname (and port) or path at which the {name} is available. This need not be a public host, just a host accessible by the Nextcloud server. It can also be a path to the docker socket. (e.g. nextcloud-appapi-dsp:2375, /var/run/docker.sock)" : "{name} 可用的主機名稱（與連接埠）或路徑。這不一定是公開主機，只要是 Nextcloud 伺服器可以存取的主機即可。也可以是 docker socket 的路徑（例如 nextcloud-appapi-dsp:2375、/var/run/docker.sock）",
    "Daemon with this name already exists" : "同名幕後程式已存在",
    "The secret key for the HaRP container communication (HP_SHARED_KEY)." : "HaRP 容器通訊的祕密金鑰 (HP_SHARED_KEY)。",
    "AppAPI Docker Socket Proxy authentication password" : "AppAPI Docker Socket Proxy 驗證密碼",
    "Changes would be applied only for newly installed ExApps. For existing ExApps, Docker containers should be recreated." : "變更僅適用於新安裝的 ExApps。對於現有的 ExApps，應重新建立 Docker 容器。",
    "The docker network that the deployed ex-apps would use." : "部署的外部應用程式將會使用的 docker 網路。",
    "URL should start with http:// or https://" : "URL 應以 http:// 或 https:// 開頭",
    "For HTTPS daemon, Nextcloud URL should be HTTPS" : "對於 HTTPS 幕後程式，Nextcloud URL 應該為 HTTPS",
    "All available GPU devices on daemon host will be requested to be enabled in ExApp containers by Docker." : "Docker 將要求在外部應用程式容器中啟用幕後程式主機上的所有可用 GPU 裝置。",
    "DaemonConfig successfully registered" : "DaemonConfig 成功註冊",
    "Failed to register DaemonConfig. Check the logs" : "註冊 DaemonConfig 失敗。請檢查紀錄檔",
    "DaemonConfig successfully updated" : "DaemonConfig 成功更新",
    "Failed to update DaemonConfig. Check the logs" : "更新 DaemonConfig 失敗。請檢查紀錄檔",
    "Edit Deploy Daemon" : "編輯部署幕後程式",
    "Register Deploy Daemon" : "註冊部署幕後程式",
    "Daemon configuration template" : "幕後程式設定範本",
    "Select daemon configuration template" : "選取幕後程式設定範本",
    "Daemon registration form" : "幕後程式註冊表單",
    "Unique Deploy Daemon Name" : "獨一無二的部署幕後程式名稱",
    "Display name" : "顯示名稱",
    "Deployment method" : "部署方法",
    "Select daemon deploy method" : "選取幕後程式部署方法",
    "HaRP host" : "HaRP 主機",
    "Daemon host" : "幕後程式主機",
    "HaRP shared key" : "HaRP 共用密鑰",
    "Password must be at least 12 characters long" : "密碼必須至少 12 個字元長",
    "Set daemon as default" : "設定幕後程式為默認值",
    "Set as default daemon" : "設定為默認 daemon",
    "Enable https" : "啟用 https",
    "Show deploy config" : "顯示部署設定",
    "Hide deploy config" : "隱藏部署設定",
    "Enable HaRP" : "啟用 HaRP",
    "FRP server address" : "FRP 伺服器位址",
    "The address (host:port) of the FRP server that should be reachable by the ex-app in the network defined in 'Docker network'." : "在「Docker network」中定義的網路裡，外部應用程式應該可以連線到的 FRP 伺服器位址（主機:連接埠）。",
    "Docker socket proxy port" : "Docker socket 代理伺服器連接埠",
    "The port in HaRP which the docker socket proxy connects to. This should be exposed but for the in-built one, it is not required to be exposed or changed." : "docker socket 代理伺服器連線到的 HaRP 連接埠。這應該是公開的，但對於內建的版本，則不需要公開或變更。",
    "Disable FRP" : "禁用 FRP",
    "Flag for the advanced setups only. Disables the FRP tunnel between ExApps and HaRP." : "僅適用於高級設置的標誌。禁用 ExApps 和 HaRP 之間的 FRP 隧道。",
    "Disabled" : "停用",
    "Docker network for ex-app deployment must be defined" : "必須定義用於外部應用程式部署的 docker 網路",
    "Additional option" : "附加選項",
    "Add additional option" : "添加附加選項",
    "Option key (unique)" : "選項密鑰（獨一無二的）",
    "Option key (unique, e.g. my_key)" : "選項密鑰（獨一無二的，例如 my_key）",
    "Option key is required" : "選項密鑰是必需要的",
    "Option value" : "選項數值",
    "Option value is required" : "選項數值是必需要的",
    "Confirm" : "確認",
    "Save" : "保存",
    "Register" : "註冊",
    "Check connection" : "檢查連線",
    "External Apps" : "外部應用程式",
    "### Boost your Nextcloud with AppAPI and its specially designed applications.\n\n\nThe AppAPI is a project within the Nextcloud ecosystem designed to streamline and enhance the process of\napplication development, deployment, and management.\n\nIt introduces a new methodology that allows developers to create\napplications using a variety of programming languages, not limited to PHP, which was traditionally used in Nextcloud development.\n\n### Bundled App\n\n**Starting with Nextcloud 30.0.1, this application is included in the default Nextcloud package.**\n\n### Support\n\nWe appreciate any support for this project:\n\n- ⭐ Star our work on GitHub\n- ❗ Create an Issue or feature request\n- 💁 Resolve an Issue and create a Pull Request\n- 🧑‍💻 Develop your own application using AppAPI\n\nWe are genuinely excited about the future of the AppAPI project and its potential to transform\nthe way applications are developed and experienced within Nextcloud.\n\nAs we embark on this journey, we warmly invite you - developers, thinkers, creators, and visionaries -\nto join us in shaping a more versatile, stable, and secure app landscape.\n\n*Your insights, suggestions, and contributions are invaluable to us.*" : "翻譯：## 為您的 Nextcloud 提升功能：AppAPI 及其專門設計的應用程式\n\nAppAPI 是 Nextcloud 生態系統中的一個專案，旨在簡化和增強應用程式的開發、部署和管理過程。\n\n它引入了一種新方法，允許開發者使用多種程式語言來創建應用程式，而不僅限於傳統的 PHP。\n\n### 捆綁應用程式\n\n**從 Nextcloud 30.0.1 開始，此應用程式已包含在默認的 Nextcloud 包中。**\n\n### 支持\n\n我們非常感謝對此專案的任何支持：\n\n- ⭐ 在 GitHub 上為我們的工作點贊\n- ❗ 創建問題或功能請求\n- 💁 解決問題並創建拉取請求\n- 🧑‍💻 使用 AppAPI 開發自己的應用程式\n\n我們對 AppAPI 專案的未來感到非常興奮，並期待它能改變應用程式在 Nextcloud 中的開發和體驗方式。\n\n在這個旅程中，我們熱忱地邀請您——開發者、思想家、創造者和遠見者——加入我們，共同塑造一個更具多樣性、更穩定和更安全的應用程式環境。\n\n*您的見解、建議和貢獻對我們而言是無價的。*",
    "The AppAPI Project is an exciting initiative that aims to revolutionize the way applications are developed for Nextcloud." : "AppAPI 專案是一項令人興奮的舉措，旨在徹底改變 Nextcloud 的應用程式開發方式。",
    "{license}-licensed" : "以 {license} 授權",
    "Update to {version}" : "更新到 {version}",
    "Delete data on remove" : "移除時刪除資料",
    "This app has no minimum Nextcloud version assigned. This will be an error in the future." : "此應用程式並未指定最低的 Nextcloud 版本。未來可能會出現錯誤。",
    "This app has no maximum Nextcloud version assigned. This will be an error in the future." : "此應用程式並未指定最高的 Nextcloud 版本。未來可能會出現錯誤。",
    "This app cannot be installed because the following dependencies are not fulfilled:" : "無法安裝此應用程式，因為無法滿足下列的依賴關係：",
    "View in store" : "在商店中檢視",
    "Visit website" : "造訪網站",
    "Report a bug" : "舉報錯誤",
    "User documentation" : "用戶使用手冊",
    "Admin documentation" : "管理員使用手冊",
    "Developer documentation" : "開發人員使用手冊",
    "This app is not registered in AppStore. No extra information available. Only enable/disable and remove actions are allowed." : "此應用程式未在 AppStore 註冊。無可用的額外資訊。僅允許啟用/停用與移除動作。",
    "This app is supported via your current Nextcloud subscription." : "您目前的 Nextcloud 訂閱支援此應用程式。",
    "Supported" : "支援",
    "Featured apps are developed by and within the community. They offer central functionality and are ready for production use." : "精選應用程式是由社群開發的。它們提供了相當重要的功能，並已準備好在正式環境使用。",
    "Featured" : "精選",
    "Update to {update}" : "更新到 {update}",
    "All ExApps are up-to-date." : "所有 ExApps 都是最新的。",
    "Default Deploy daemon is not accessible" : "預設部署幕後程式無法使用",
    "Icon" : "圖示",
    "Version" : "版本",
    "Daemon" : "守護程式",
    "Level" : "級別",
    "Actions" : "操作",
    "Results from other categories" : "其他分類的結果",
    "No apps found" : "找不到應用程式",
    "_%n ExApp has an update available_::_%n apps have an update available_" : ["%n 個應用程式有可用的更新"],
    "_Update_::_Update all_" : ["更新全部"],
    "Type" : "類型",
    "Display Name" : "顯示名稱",
    "Hostname or path to access Docker daemon (e.g. nextcloud-appapi-dsp:2375, /var/run/docker.sock)" : "存取 Docker 幕後程式的主機名稱或路徑（例如 nextcloud-appapi-dsp:2375, /var/run/docker.sock）",
    "With https enabled network is set to host" : "啟用 https 後，網絡設定為主機",
    "Network" : "網絡",
    "Docker network name" : "Docker 網路名字",
    "by {author}\n{license}" : "作者為 {author}\n{license}",
    "Your apps" : "您的應用程式",
    "Documentation" : "說明書",
    "Details" : "細節",
    "Changelog" : "更新紀錄",
    "Active apps" : "已啟用應用程式",
    "Disabled apps" : "已停用應用程式",
    "Updates" : "更新",
    "Featured apps" : "精選應用程式",
    "Supported apps" : "支援的應用程式",
    "manual-install apps cannot be updated" : "無法更新手動安裝應用程式",
    "{progress}% Deploying" : "{progress}% 部署中",
    "{progress}% Initializing" : "初始化 {progress}%",
    "Healthchecking" : "健康檢查",
    "Deploy and Enable" : "部署與啟用",
    "Enable" : "啟用",
    "Disable" : "停用",
    "Allow untested app" : "允許未經測試的應用程式",
    "Default Deploy daemon is not accessible. Please verify configuration" : "預設部署幕後程式無法使用。請驗證設定",
    "The app will be downloaded from the App Store and deployed on default Deploy Daemon" : "該應用程式將從 App Store 下載並部署在預設的部署幕後程式上",
    "This app is not marked as compatible with your Nextcloud version. If you continue you will still be able to install the app. Note that the app might not work as expected." : "此應用程式未被標記為與您的 Nextcloud 版本相容。如果繼續，您仍可安裝應用程式。但請注意應用程式可能無法正常運作。",
    "Your ExApps" : "您的 ExApps",
    "An error occurred during the request. Unable to proceed." : "請求時發生錯誤。無法繼續。",
    "The app has been enabled but needs to be updated." : "應用程式已啟用，但需要更新。",
    "Error: This app cannot be enabled because it makes the server unstable" : "錯誤：此應用程序無法啟用，因為它造成伺服器不穩定",
    "### Boost your Nextcloud with AppAPI and its specially designed applications.\n\n\nThe AppAPI is a project within the Nextcloud ecosystem designed to streamline and enhance the process of\napplication development, deployment, and management.\n\nIt introduces a new methodology that allows developers to create\napplications using a variety of programming languages, not limited to PHP, which was traditionally used in Nextcloud development.\n\n\n### List of applications that require AppAPI:\n\n- [talk_bot_ai_example](https://github.com/cloud-py-api/talk_bot_ai_example)\n- [upscaler_example](https://github.com/cloud-py-api/upscaler_example)\n- [image_to_text_example](https://github.com/cloud-py-api/file_to_text_example)\n- [ai_image_generator_bot](https://github.com/cloud-py-api/ai_image_generator_bot)\n- [SummarAI](https://github.com/nextcloud/sumupbot)\n\n_If you wish to develop an application, we will gladly help and assist you._\n\n### Support\n\nWe appreciate any support for this project:\n\n- ⭐ Star our work on GitHub\n- ❗ Create an Issue or feature request\n- 💁 Resolve an Issue and create a Pull Request\n- 🧑‍💻 Develop your own application using AppAPI\n\nWe are genuinely excited about the future of the AppAPI project and its potential to transform\nthe way applications are developed and experienced within Nextcloud.\n\nAs we embark on this journey, we warmly invite you - developers, thinkers, creators, and visionaries -\nto join us in shaping a more versatile, stable, and secure app landscape.\n\n*Your insights, suggestions, and contributions are invaluable to us.*" : "### 使用 AppAPI 與其專門設計的應用程式強化您的 Nextcloud\n\n\nAppAPI 是 Nextcloud 生態系中的一個專案，旨在簡化並強化\n應用程式開發、部署及管理。\n\n其引入了一種新的方法，讓開發者可以製作\n使用多種程式語言的應用程式，不僅限於 PHP，後者傳統上用於 Nextcloud 開發。\n\n\n### 需要 AppAPI 的應用程式清單：\n\n- [talk_bot_ai_example](https://github.com/cloud-py-api/talk_bot_ai_example)\n- [upscaler_example](https://github.com/cloud-py-api/upscaler_example)\n- [image_to_text_example](https://github.com/cloud-py-api/file_to_text_example)\n- [ai_image_generator_bot](https://github.com/cloud-py-api/ai_image_generator_bot)\n- [SummarAI](https://github.com/nextcloud/sumupbot)\n\n_若您希望開發應用程式，我們將很樂意為您提供協助。_\n\n### 支援\n\n我們感謝對此專案的任何支援：\n\n- ⭐ 在 GitHub 上給我們的作品星星\n- ❗ 建立問題或功能請求\n- 💁 解決問題並建立拉取請求\n- 🧑‍💻 使用 AppAPI 開發您自己的應用程式\n\n我們對 AppAPI 專案的未來及其改變 Nextcloud 中應用程式開發與\n體驗方式的潛力感到由衷的興奮。\n\n當我們踏上這趟旅程時，我們熱烈邀請您（開發者、思想家、創造者和夢想家）\n與我們一起塑造更通用、穩定和安全的應用程式格局。\n\n*您的見解、建議和貢獻對我們來說非常寶貴。*"
},"pluralForm" :"nplurals=1; plural=0;"
}